Tapmaster - Toe Kick Mount Kit 8010 For Model 1780 Series Floor Activators
Product Information:
- Products Model: 8010
- Product Brand: Tapmaster, Inc.
- Condition: New
- Warranty: 5 Years
This product is also in these categories:
Product images shown are for illustration purposes only and may not be an exact representation of the product. If you have questions regarding product images click here. The shipping cost provided is an estimate. Actual shipping and handling costs may vary based on the destination, logistics, supply chain challenges, and other shipment requirements. The actual shipping cost will be added to the final invoice.
This toe kick mount kit is designed to allow the user to mount their Model 1780 Series floor activator against the toe kick of the cabinet. This kit comes with a bezel used for mounting the activator to the floor and all of the necessary mounting hardware.
Included with Model 1780 Series toe kick mount kit:
Rugged Glass filled polypropylene 10° angled bezel
Short Replacement Screws for disc mounting
Stainless Steel Mounting Hardware
Specifications
| Pressure | Operating | 0 to 125 psi (862 kpa) maximum |
| Static Burst Rating | 700 psi (4,830 kpa) for complete assembly | |
| Flow | Both Valve Blocks | 7.2 gpm @ 60 psi (27.01/m @ 4 bar) |
| Connections – Valve Blocks | Inlet | Integrated 3/8" compression nut "O" ring seal |
| Outlet | Nut and sleeve, 3/8" compression | |
| Filtration | Control Circuit | 25 micron |
| Main Port | Greater than .060" (1.5 mm) | |
| Construction | Valve Bodies | Chrome plated brass |
| Seals | Silicone or E.P.D.M. | |
| Control Tubing | 1/8" O.D. 3 tube bundle (high density polyurethane) | |
| Kick Plate (1740 & 1750 Series) | 18g #4 brushed stainless steel top, aluminum base | |
| Foot Pedal (1760 Series) | 18g #4 brushed stainless steel | |
| Euro (1770 Series) | Brushed nickel plated brass housing; stainless steel mechanism, polyurethane probe | |
| Floor Activators (1780 Series) | 304 stainless steel laminate, polyurethane buttons, stainless steel hardware | |
| Dimensions | Valve Block (less tube fittings) | 2.5" x .88" x 1.25" (6.35 x 2.24 x 3.18 cm) |
| Button Valve Fittings | .63" x .63" x 1.0" (1.60 x 1.60 x 2.54 cm) | |
| Kick Plate (1740 & 1750 Series) | 8.0"w x 3.42"h x 1.14"d (20.32 x 8.64 x 2.90 cm) | |
| Floor Foot Pedal (1760 Series) | 7.1"w x 3.0"h x 1.1"d (18 x 7.6 x 2.8 cm) | |
| Euro (1770 Series) | 1.19"w x 4.92"h x 1.37"d (3.0 x 12.5 x 3.5 cm) | |
| Floor Activators (1780 Series) | 5.65" diameter disc (14.35 cm) |