Tapmaster - Model 1786 Floor Activator With Temperature Selection Feature
Product Information:
- Products Model: 1786
- Product Brand: Tapmaster, Inc.
- Condition: New
- Warranty: 5 Years
This product is also in these categories:
Product images shown are for illustration purposes only and may not be an exact representation of the product. If you have questions regarding product images click here. The shipping cost provided is an estimate. Actual shipping and handling costs may vary based on the destination, logistics, supply chain challenges, and other shipment requirements. The actual shipping cost will be added to the final invoice.
Our Model 1786 HWC floor activator shares the same low profile styling and performance as our Model 1780. This unique feature ensures that you never have to touch your faucet! By stepping on either the blue or red activation points the operator can choose either cold or hot water. Stepping on both activation points yields warm water so you don't ever have to adjust your faucet to go from pouring a glass of water to washing your hands or rinsing dishes!
With the available Surface Mount Kit Number 8050 the Model 1786 can be easily installed in any location as this provides a solution for finished floors.
In-line valve blocks are precision machined, chrome plated solid brass, featuring smooth shut off, crossflow prevention, as well as main water flow screening and control circuit filtration.
Specifications
| Pressure | Operating | 0 to 125 psi (862 kpa) maximum |
| Static Burst Rating | 700 psi (4,830 kpa) for complete assembly | |
| Flow | Both Valve Blocks | 7.2 gpm @ 60 psi (27.01/m @ 4 bar) |
| Connections – Valve Blocks | Inlet | Integrated 3/8" compression nut "O" ring seal |
| Outlet | Nut and sleeve, 3/8" compression | |
| Filtration | Control Circuit | 25 micron |
| Main Port | Greater than .060" (1.5 mm) | |
| Construction | Valve Bodies | Chrome plated brass |
| Seals | Silicone or E.P.D.M. | |
| Control Tubing | 1/8" O.D. 3 tube bundle (high density polyurethane) | |
| Kick Plate (1740 & 1750 Series) | 18g #4 brushed stainless steel top, aluminum base | |
| Foot Pedal (1760 Series) | 18g #4 brushed stainless steel | |
| Euro (1770 Series) | Brushed nickel plated brass housing; stainless steel mechanism, polyurethane probe | |
| Floor Activators (1780 Series) | 304 stainless steel laminate, polyurethane buttons, stainless steel hardware | |
| Dimensions | Valve Block (less tube fittings) | 2.5" x .88" x 1.25" (6.35 x 2.24 x 3.18 cm) |
| Button Valve Fittings | .63" x .63" x 1.0" (1.60 x 1.60 x 2.54 cm) | |
| Kick Plate (1740 & 1750 Series) | 8.0"w x 3.42"h x 1.14"d (20.32 x 8.64 x 2.90 cm) | |
| Floor Foot Pedal (1760 Series) | 7.1"w x 3.0"h x 1.1"d (18 x 7.6 x 2.8 cm) | |
| Euro (1770 Series) | 1.19"w x 4.92"h x 1.37"d (3.0 x 12.5 x 3.5 cm) | |
| Floor Activators (1780 Series) | 5.65" diameter disc (14.35 cm) |